Claims (1)
ข้อถือสิทธฺ์ (ทั้งหมด) ซึ่งจะไม่ปรากฏบนหน้าประกาศโฆษณา :------02/07/2563------(OCR) 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ ประกอบด้วยแผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟจากแผงโซล่าร์เซลล์ (5) สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8) หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะคือ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคา โดยให้หันผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง เป็นตำแหน่งที่ไม่ถูกละอองน้ำที่พ่น ต่อวงจรไฟฟ้าจากแผงโซล่าร์เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์(4) ภายในติดตั้งวงจรควบคุมแรงดันไฟฟ้า (Voltage Regulator) เพื่อควบคุมไฟฟ้าที่ออกมาจากกล่องให้มีค่าไม่เกิน 12 โวลท์ และติดตั้งเบรกเกอร์ขนาด 5 แอมแปร์ จำนวน 2 ตัว เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุดมอเตอร์และปั๊มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับโหลด (6) ขณะระบบทำงานแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์และปั๊มน้ำ (2)ขนาดแรงดันไฟฟ้า 12 โวลท์ กระแสไฟฟ้าสูงสุดเท่ากับ 2.6 แอมแปร์ ความดัน 80 ปอนด์ต่อตารางนิ้ว ที่อัตราการไหลของน้ำ 4 ลิตรต่อนาที เพื่อทำการสูบน้ำจากถังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ทั่วหลังคาด้วยหัวพ่นน้ำ (9) ที่ทำจากท่อโลหะและอุดรูที่ปลายท่อ และท่อถูกผ่าให้มีรอยผ่าครึ่งหนึ่งของท่อ โดยให้รอยผ่าอยู่ห่างจากปลายด้านที่อุด จากนั้นทำการยึดให้ติดกับท่อส่งน้ำ (8) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากรางน้ำ (11) ที่ท่อจากรางน้ำ (11) มีการติดตั้งตัวกรองน้ำ (13) ที่เป็นเครื่องกรองน้ำแบบหยาบ เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่สะอาดจะไหลต่อไปยังส่วนที่ลดอุณหภูมิน้ำ คือ ท่อปล่อยน้ำ (12) ที่วางตัวขวางอยู่และมีรูจำนวนมากเรียงกันตลอดแนวท่อปล่อยน้ำ (12) เพื่อให้น้ำไหลออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ โดยให้ท่อปล่อยน้ำ (12) อยู่สูงกว่าถังเก็บน้ำ (7) น้ำที่ไหลออกจากท่อปล่อยน้ำ (12)จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) เป็นพัดลมไฟฟ้ากระแสตรง ติดตั้งอยู่ด้านข้างบริเวณใกล้กับน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มากขึ้น น้ำที่มีอุณหภูมิตาลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บน้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึงระดับน้ำที่กำหนดให้ ------------ ------12/12/2562------(OCR) หน้า 1 ของจำนวน 1 หน้าข้อถือสิทธิ 1. แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟจากแผงโซล่าร์เซลล์ (5) สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8) หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11) ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะคือ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคา โดยให้หันผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง เป็นตำแหน่งที่ไม่ถูกละอองน้ำที่พ่น ต่อวงจรไฟฟ้าจากแผงโซล่าร์เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์(4) ภายในติดตั้งวงจรควบคุมแรงดันไฟฟ้า (Voltage Regulator) เพื่อควบคุมไฟฟ้าที่ออกมาจากกล่องให้มีค่าไม่เกิน 12 โวลท์ และติดตั้งเบรกเกอร์ขนาด 5 แอมแปร์ จำนวน 2 ตัว เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุดมอเตอร์และปั๊มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับโหลด (6) ขณะระบบทำงานแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์และปั๊มน้ำ (2)ขนาดแรงดันไฟฟ้า 12 โวลท์ กระแสไฟฟ้าสูงสุดเท่ากับ 2.6 แอมแปร์ ความดัน 80 ปอนด์ต่อตารางนิ้ว ที่อัตราการไหลของน้ำ 4 ลิตรต่อนาที เพื่อทำการสูบน้ำจากถังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ทั่วหลังคาด้วยหัวพ่นน้ำ (9) ที่ทำจากท่อโลหะและอุดรูที่ปลายท่อ และท่อถูกผ่าให้มีรอยผ่าครึ่งหนึ่งของท่อ โดยให้รอยผ่าอยู่ห่างจากปลายด้านที่อุด จากนั้นทำการยึดให้ติดกับท่อส่งน้ำ (8) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากรางน้ำ (11) ที่ท่อจากรางน้ำ (11) มีการติดตั้งตัวกรองน้ำ (13) ที่เป็นเครื่องกรองน้ำแบบหยาบ เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่สะอาดจะไหลต่อไปยังส่วนที่ลดอุณหภูมิน้ำ คือ ท่อปล่อยน้ำ (12) ที่วางตัวขวางอยู่และมีรูจำนวนมากเรียงกันตลอดแนวท่อปล่อยน้ำ (12) เพื่อให้น้ำไหลออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ โดยให้ท่อปล่อยน้ำ (12) อยู่สูงกว่าถังเก็บน้ำ (7) น้ำที่ไหลออกจากท่อปล่อยน้ำ (12)จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) เป็นพัดลมไฟฟ้ากระแสตรง ติดตั้งอยู่ด้านข้างบริเวณใกล้กับน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มากขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บน้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึงระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์ (5) สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8) หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11) ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และป็มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั๊มน้ำ (2) เพื่อทำการสูบน้ำจากกังเก็บน้ำ (7) ฝานท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ (11) ที่ท่อจากรางน้ำ (11) มีการติดตั้งตัวกรองน้ำ (13) เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3)ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) ---* หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิ 1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้ ------------ ------28/09/2560------(OCR) ------------ ------28/09/2560------(OCR) ------------ ------28/11/2560------ หน้า 1 ของจำนวน 1 หน้า ข้อถือสิทธิDisclaimer (all) which will not appear on the advertisement page. : ------ 02/07/2020 ------ (OCR) 1. Solar cell spray system for cooling roof with recirculation. Includes solar panel (1), motor and water pump assembly (2) electric fan (3) breaker box (4) solar panel wires (5) load connection cable (6) water tank. (7) water supply pipe (8) water spray head (9) gutter (10) gutter (11) water discharge hose (12) and water filter (13) have the characteristics of Solar panels (1) are installed by fixing them on the top of the roof. By facing the surface of the solar panel to the south Make the angle of inclination to the plane equal to the latitude of the mounting position Is a position not being exposed to the water spray Connect the electric circuit from the solar panel with wires from the solar panel (5) to the breaker box (4) inside.Install a voltage regulator circuit to control the electricity coming out of the box. Up to 12 volts and 2 5 amperes are installed as an on / off switch for the motor and water pump unit (2) and electric fan (3) connected to the brake box. The unit (4) is connected to the load (6) while the system is running, the solar panel (1) generates DC power to the motor and water pump. (2) Size: 12 volts, maximum current of 2.6 amperes, pressure 80 psi. At a flow rate of 4 liters per minute to pump water from a water tank (7) through a water supply pipe (8) up to the roof and spray it over the roof with a spray nozzle (9) made of a hose. Metal and caulk at the end of the pipe And the pipe was cut in half of the tube. By keeping the slit away from the end of the filling Then fixed to the water pipe (8), the water will flow through the roof and go down into the gutter (10) and flow into the pipe from the gutter (11) where the pipe from the gutter (11) is installed. Water filter (13) that is a coarse water filter. In order to get rid of impurities contaminated with water And clean water will continue to flow to the lower part of the water is the water discharge pipe (12) that is placed across it and there are numerous holes arranged along the water discharge pipe (12) to allow the water to flow out in a thin line. Number of lines To increase the contact surface area between water and air The water discharge hose (12) is higher than the water tank (7) the water flowing from the water discharge pipe. (12) will flow through the air flow blown from the electric fan (3) is a DC electric fan. It is installed on its side near the water flowing from the discharge pipe (12), which uses the electricity generated by the solar panel (1) to force the air to flow through the water that flows from the discharge pipe (12). ) And help lower the water temperature even more The low temperature water will be collected in a water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 12/12/2019 ------ (OCR) page 1 of amount 1 page Claims 1. Solar panel (1) Motor and water pump assembly (2) Electric fan (3) Breaker box (4) Solar panel wiring (5) Power cable It is connected to the load (6), water tank (7), water supply pipe (8), spray head (9), gutter (10), gutter pipe (11), water discharge hose (12) and water filter (13). Is Solar panels (1) are installed by fixing them on the top of the roof. By facing the surface of the solar panel to the south Make the angle of inclination to the plane equal to the latitude of the mounting position Is a position not being exposed to the water spray Connect the electric circuit from the solar panel with wires from the solar panel (5) to the breaker box (4) inside.Install a voltage regulator circuit to control the electricity coming out of the box. Up to 12 volts and 2 5 amperes are installed as an on / off switch for the motor and water pump unit (2) and electric fan (3) connected to the brake box. The unit (4) is connected to the load (6) while the system is running, the solar panel (1) generates DC power to the motor and water pump. (2) Size: 12 volts, maximum current of 2.6 amperes, pressure 80 psi. At a flow rate of 4 liters per minute to pump water from a water tank (7) through a water supply pipe (8) up to the roof and spray it over the roof with a spray nozzle (9) made of a hose. Metal and caulk at the end of the pipe And the pipe was cut in half of the tube. By keeping the slit away from the end of the filling Then fixed to the water pipe (8), the water will flow through the roof and go down into the gutter (10) and flow into the pipe from the gutter (11) where the pipe from the gutter (11) is installed. Water filter (13) that is a coarse water filter. In order to get rid of impurities contaminated with water And clean water will continue to flow to the lower part of the water is the water discharge pipe (12) that is placed across it and there are numerous holes arranged along the water discharge pipe (12) to allow the water to flow out in a thin line. Number of lines To increase the contact surface area between water and air The water discharge hose (12) is higher than the water tank (7) the water flowing from the water discharge pipe. (12) will flow through the air flow blown from the electric fan (3) is a DC electric fan. It is installed on its side near the water flowing from the discharge pipe (12), which uses the electricity generated by the solar panel (1) to force the air to flow through the water that flows from the discharge pipe (12). ) And help lower the water temperature even more Lower temperature water is collected in a water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor and water pump (2) to pump water from the water storage tank (7). Slice the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between water and air, the water flowing from the water discharge pipe (12) flows through the airflow blown by the electric fan. (3) which uses electricity generated from solar panels (1) to force wind to flow through the water that flows from the discharge pipe (12) and to help lower the temperature of the water further, the lower the water temperature. Will be collected in the water tank (7) to be pumped up to continue to use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) - - * Page 1 of Quantity 1 Claims 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1), motor and water pump ( 2) Electric fan (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water delivery pipe (8) Water spray nozzle (9) The gutter (10), the gutter (11), the water discharge pipe (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) page. 1 of amount 1 page. Rights 1. Solar water spraying system for cooling roof with water recirculation consists mainly of solar panel (1) motor and water pump (2) electric fan. (3) Breaker box (4) Solar panel wiring (5) Load connection cable (6) Water tank (7) Water distribution pipe (8) Spray nozzle (9) Conduit (10) The pipes from the gutter (11), the water discharge hose (12) and the water filter (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water in the water tank (7) until the water level set ------------ ------ 28/09/2017 ------ (OCR) - ----------- ------ 28/09/2017 ------ (OCR) ------------ ------ 28 / 11/2017 ------ page 1 of amount 1 page.
1. ระบบพ่นน้ำโซล่าร์เซลล์สำหรับระบายความร้อนหลังคาแบบมีการหมุนเวียนน้ำ มีส่วนประกอบ หลักๆ ได้แก่ แผงโซล่าร์เซลล์ (1) ชุดมอเตอร์และปั๊มน้ำ (2) พัดลมไฟฟ้า (3) กล่องเบรกเกอร์ (4) สายไฟ จากแผงโซล่าร์เซลล์(5)สายไฟต่อกับโหลด (6) ถังเก็บน้ำ (7) ท่อส่งน้ำ (8)หัวพ่นน้ำ (9) รางน้ำ (10) ท่อจากรางน้ำ (11)ท่อปล่อยน้ำ (12) และ ตัวกรองน้ำ (13) มีลักษณะเฉพาะดังนี้ แผงโซล่าร์เซลล์ (1) ทำการติดตั้งโดยยึดติดทางด้านบนของหลังคาหรือโครงเหล็ก โดยให้หัน ผิวหน้าของแผงโซล่าร์เซลล์ไปทางทิศใต้ ทำมุมเอียงกับแนวระนาบเท่ากับมุมละติจูดของตำแหน่งที่ติดตั้ง และไม่มีต้นไม้หรือสิ่งปลูกสร้างที่ทำให้เกิดการบังแสงบนแผงโซล่าร์เซลล์ ต่อวงจรไฟฟ้าจากแผงโซล่าร์ เซลล์ด้วยสายไฟจากแผงโซล่าร์เซลล์ (5) มายังกล่องเบรกเกอร์ (4) เพื่อเป็นสวิทช์ปิด/เปิดการทำงานของชุด มอเตอร์และปั้มน้ำ (2) และพัดลมไฟฟ้า (3) ที่ต่อวงจรไฟฟ้าอยู่กับกล่องเบรกเกอร์ (4) ด้วยสายไฟต่อกับ โหลด (6) เมื่อมีแสงอาทิตย์ตกกระทบบนแผงโซล่าร์เซลล์ (1) จะผลิตไฟฟ้ากระแสตรงจ่ายไฟยังชุดมอเตอร์ และปั้มน้ำ (2) เพื่อทำการสูบน้ำจากลังเก็บน้ำ (7) ผ่านท่อส่งน้ำ (8) ขึ้นไปบนหลังคาและพ่นเป็นละอองให้ ทั่วหลังคาด้วยหัวพ่นน้ำ (9) น้ำจะไหลผ่านหลังคาและลงไปรวมกันที่รางน้ำ (10) และไหลลงสู่ท่อจากราง น้ำ(11) ที่ท่อจากรางน้ำ(11) มีการติดตั้งตัวกรองน้ำ(13)เพื่อกำจัดสิ่งสกปรกที่เจือปนมากับน้ำ และน้ำที่ สะอาดจะไหลต่อไปยังท่อปล่อยน้ำ (12) ที่เป็นท่อวางตัวขวางอยู่และมีรูเจาะจำนวนมาก เพื่อให้น้ำไหล ออกมาลักษณะเป็นเส้นเล็กจำนวนหลายเส้น เพื่อเพิ่มพื้นที่ผิวสัมผัสระหว่างน้ำกับอากาศ น้ำที่ไหลออก จากท่อปล่อยน้ำ (12) จะไหลผ่านกระแสลมที่พัดจากพัดลมไฟฟ้า (3) ซึ่งใช้ไฟฟ้าที่ผลิตได้จากแผงโซล่าร์ เซลล์ (1) เพื่อบังคับลมให้ไหลผ่านน้ำที่ไหลออกจากท่อปล่อยน้ำ (12) และช่วยลดอุณหภูมิของน้ำลงได้มาก ขึ้น น้ำที่มีอุณหภูมิต่ำลงจะถูกเก็บในถังเก็บน้ำ (7) เพื่อสูบขึ้นไปใช้งานต่อไป ขณะใช้งานถ้าน้ำในถังเก็บ น้ำ (7) ลดลงเนื่องจากการระเหยและการรั่วไหลขณะระบบทำงาน ให้ทำการเติมน้ำในถังเก็บน้ำ (7) จนถึง ระดับน้ำที่กำหนดให้1.Solar water spraying system for recirculating roof cooling, mainly composed of solar panel (1), motor and pump assembly (2), electric fan (3), breaker box (4). ) Solar panel power cable (5) Load connection cable (6) Water tank (7) Water supply pipe (8) Water spray head (9) Gutter (10) Pipe from gutter (11) Discharge tube Water (12) and water filters (13) have the following characteristics. The solar panel (1) is installed by fixing it on the top of the roof or the steel frame, facing the surface of the solar panel to the south. Make the angle of inclination to the plane equal to the latitude of the mounting position. And there are no trees or buildings that cause shading on the solar panel Connect the electric circuit from the solar panel. The cells with wires from the solar panel (5) to the breaker box (4) as an on / off switch of the unit. Motor and water pump (2) and electric fan (3) connected to the circuit breaker box (4) with wires connected to the load (6), when sunlight strikes the solar panel (1), it will Generate DC power to supply power to the motor unit and water pump (2) to pump water from the water storage crate (7) through the water pipes (8) up to the roof and spray it. Throughout the roof with water jets (9), the water flows through the roof and goes down into the gutter (10) and flows into the gutter (11) where the pipe from the gutter (11) is installed a water filter ( 13) To remove the contaminated water and clean water will flow through the water discharge hose (12), a large number of holes drilled in it. To keep the water flowing Came out like many small lines To increase the contact surface area between the water and air, the water flowing from the discharge pipe (12) passes through the airflow blown by the electric fan (3), which uses the electricity generated by the solar panel (1) to direct the wind. It flows through the water that flows from the discharge hose (12) and helps to reduce the temperature of the water further. The lower temperature water is collected in the water tank (7) to be pumped up for further use. During operation, if the water in the water tank (7) decreases due to evaporation and leakage during operation. To add water to the water tank (7) until the water level set.